Guide: Maserati Chubasco - a Historical & Technical Appraisal
/ Ben Tyer
BACKGROUND
After Maserati was acquired by Alessandro de Tomaso in 1975, the company (backed by substantial government investment) began to move away from its traditional line of exclusive high performance motor cars.
The future lay with the Biturbo: a sporty executive range launched in 1981 to compete with the likes of BMW, Mercedes-Benz and Jaguar. It would also spearhead the firm’s re-entry to the lucrative North American market.
Despite the Biturbo initially selling quite well, Maserati’s product line throughout the mid-to-late 1980s was much the worse for lacking a flagship befitting the marque’s heritage.
That was due to change in early 1992, when Maserati hoped to begin production of a new supercar.
Named Chubasco after violent Central and Southern American storms, a fairly well advanced prototype was displayed at Maserati’s annual end-of-year press conference in December 1990.
Unveiled a year after the new V8-powered Shamal alongside the two-litre Tipo 331 Racing, the Chubasco was a completely new mid-engined two-seater with a planned production run of 450 units. It would theoretically be pitched as a cut-price rival to the Lamborghini Diablo and Ferrari Testarossa.
CHASSIS
Alessandro de Tomaso had long been a fan of the competition-derived spine chassis layout having adopted it for his pioneering Vallelunga and subsequent Mangusta models during the 1960s.
The Chubasco also used this arrangement; it was based around an aluminium honeycomb central backbone with ribbed light-alloy subframes to carry the suspension and engine.
Unequal length wishbones were fitted all round with inboard pushrod spring/damper units at the front and a pullrod layout at the rear.
The fuel tank was located within the central chassis tube.
BODYWORK
Marcello Gandini was responsible for the handsome bodywork. It attached to the chassis by way of dampers that absorbed vibration and insulated the cockpit from noise.
Gandini paid considerable attention to airflow. He created three front intakes that channelled air underneath the doors and out through the rear bodywork. These not only cooled the engine and ancillaries, but enhanced the ground-effect produced by a flat underside and rear venturi.
The Chubasco also had an electric hard top that slid backwards over the engine.
In typical Gandini-fashion, Lamborghini-style scissor doors were utilised.
To add a finishing touch, body-coloured aero discs covered the split-rim five spoke wheels.
ENGINE / TRANSMISSION
Power would come from an uprated version of the 3.2-litre 32-valve 90° V8 found in the Shamal.
Dry-sumped, twin turbocharged and with dual overhead camshafts, output was a quoted 430bhp at 6500rpm, but no other technical details were released.
Transmission was via a six-speed manual gearbox with twin-plate clutch and limited-slip differential.
RECEPTION
Despite being very well received, the Chubasco programme was soon cancelled by Fiat who had acquired 50% of the debt-plagued Maserati company in January 1990.
Cited as too expensive to build, just the one prototype was ever produced.
However, the Chubasco’s chassis layout lived to see another day and was used as the basis for the Maserati Barchetta one-make racing car launched in 1992.
This in turn became the De Tomaso Guara in 1993.
Text copyright: Supercar Nostalgia
Photo copyright: Maserati - https://maserati.com
A litany of beautiful and successful Maserati sports racing cars were produced during the 1950s with among the most highly regarded having been the second generation A6 GCS of which 52…
Conceived as a more affordable model that could sell in far greater numbers than Maseratis of the past, the Biturbo came to exemplify Alejandro de Tomaso’s time in charge of Il Tridente.
In an austere post-World War 2 environment, Maserati, which from 1947 came under total control of the Orsi family, had to get serious about building a potentially lucrative line of road cars. The firm had…
As the pre-eminent force in Wedge design, it was unsurprising that Maserati commissioned Bertone to style its front-engined Grand Tourer for the 1970s which came to be known as the Khamsin. Under…
Around four years after Ghibli production had started, Maserati replaced the model’s original 4.7-litre V8 with a 4.9-litre unit thus creating the Ghibli SS. The SS engine engine was enlarged thanks a…
Since the Wedge era, Carozzeria Zagato has embraced a largely unconventional design language that frequently divides opinion. However, although the Milan coachbuilder has always demonstrated…
Up until the late 1950s, Maserati’s road car division was focused on low volume coachbuilt models that did not generate sufficient income to cover the firm’s expensive Formula 1 and Sports car racing…
For 1962, the World Sportscar Championship was split into two categories: the International Championship for GT Manufacturers and the Coupe des Sports. In addition, the calendar was…
Boasting a top speed of 170mph+ and a $21,500 price tag, it was the most powerful and most expensive Italian supercar you could buy new in 1962. Most people have never seen one – hardly…
A few months after Citroen took control of Maserati in January 1968, the Italian firm began work on a two-seat mid-engined flagship; it would be the first road-going Maserati to adopt this exciting…
Thanks to radical new concealed headlights, the avant-garde Maserati Ghibli cut a real dash compared to its original two-seat GT rival: the more classically-styled Ferrari 275 GTB/4. Deliveries…
To style the body and interior for its new front-engined Grand Tourer that would effectively replace the outgoing Ghibli and Mexico, Maserati turned to Bertone, a design studio at the height of its…
Despite having been conceived strictly as a road car, in late 1972 Maserati’s French distributor, Jean Thepenier, commissioned a Group 4 racing version of the mid-engined Bora with which to contest…
Unlike the more numerous Touring-styled 3500 GT Coupe, Maserati’s open top variant of the theme was based on a short wheelbase chassis with coachwork by Vignale. In typical Vignale…
Following on from the original A6 GCS which since 1947 had proven an enormously successful mount for the popular under two-litre Sports car class, Maserati produced an improved Series 2…
Maserati unveiled its first true wedge-profiled production car, the Khamsin, at the Paris Motor Show in October 1973. Impressively, chief Bertone stylist, Marcello Gandini, had incorporated all…
Although the Touring-bodied 3500 GT and GTi ranked as arguably the most handsome 2+2 Grand Tourers on offer during the late 1950s and early 1960s, Maserati elected to commission Carrozzeria…
Two and a half years after the original Merak had been launched (at the Paris Motor Show in October 1972), Maserati unveiled a much-improved version to replace it. Dubbed the Merak SS…
Having exclusively produced cars for competition use since 1926, Maserati decided to expand into the lucrative market for road-going passenger vehicles following the conclusion of World War 2.
When it debuted in prototype form at the Turin Motor Show in October 1966, there was nothing on the market to compare with Maserati’s new Tipo 115 Ghibli. Styled by Giorgetto Giugiaro over at…
Having assumed full control of Maserati in May 1993 (following the acquisition of an initial 49% stake in December 1989), Fiat sold 50% of the Modena-based company to Ferrari (another Fiat subsidiary)…
Soon after the Ferrari Enzo had been launched, parent company Fiat gave the green light for a GT1 racing version to be developed. However, instead of being badged as a Ferrari, the new machine…
Launched at the Paris Motor Show in October 1954, the A6G/54 was Maserati’s Grand Touring version of the second generation A6GCS sports racing car (often dubbed the A6GCS/53) which had proven…
Chassis 048 was the first of two Maserati 5000 GTs equipped with coachwork by Frua. Although not officially signed off until June 18th 1962, chassis 048 was completed in time to go on display at…
Chassis 060 was one of two late production examples of the Maserati 5000 GT that received coachwork by Frua of Turin. It was commissioned by 25 year old Paris-domiciled Shah Karim al…
Launched at the Turin Motor Show in October 1966, the Maserati Tipo 115 Ghibli was a rakish two-seat Coupe styled by Giorgetto Giugiaro at Ghia. Under the skin it was very much in the traditional…
The 3500 GT (Tipo 101) was born as a result of a realisation that Maserati finally had to get serious about building a production model that could be sold in the high hundreds or even thousands.
Buyers for super high end Grand Tourers in the early 1960s needed to look only in one place: Italy. Between them, bitter rivals Ferrari and Maserati had the market for truly customisable 160mph-plus…
In its first full season of competition (2005), Maserati’s MC12 secured both the FIA GT Manufacturers’ and Teams’ titles. Of the four FIA GT Championship races that fell to the MC12 in 2005, undoubtedly…
In a similar fashion to the Mercedes-Benz 300 SLR which was a sports racing version of the W196 Formula 1 car, Maserati’s 300 S was heavily derived from the fabled 250F. Built around a tubular…